Concrete Curing

Heat Com ConCure Features

  • Delivers consistent heat for concrete curing in extremely cold or damp conditions
  • Ensures faster hardening by supplying up to 400 W per cubic metre
  • Allows highly precise temperature control using a suitable external thermostat if required
  • Features robust XLPE construction and Mylar tape earthing for overall superior durability
  • Permits flexible installation with 40 mm radius and slim 5.5 mm diameter
  • Supplied in lengths from 10 m to 85 m for diverse requirements
  • Includes a two-metre cold cable and plug for quick, reliable power connections
  • Backed by a two-year warranty and CE approval under IEC/EN 60800 standards
  • Designed and manufactured in Denmark

Concrete Curing

Category: Concrete Curing
Category:

Heat Com ConCure

The solution when constructing concrete structures in low temperature and high humidity

When constructing concrete structures in conditions of low temperatures and high humidity, the concrete hardening process takes longer, and heat may be needed during curing.
The power requirement for concrete curing is up to 400 W/m³. For this purpose, a heating cable with a power of 40 W/m is used. The concrete-curing cable must be installed and controlled taking into account the current conditions. For example, if there is a requirement for a maximum temperature during curing, one can control the heating cable via a suitable thermostat. The cable can be installed at down to -15°C. In colder weather, one option is to briefly turn the cable on and heat it up.

Heat Com ConCure Technical Specification

 

Application Concrete curing for low temp high humidity conditions
Nominal Power 40W/m
Voltage 230V +/-10%
Cable Dimensions 5.5mm +/-10
Conductor Insulation XLPE
Cold Cable 2m with plug
Permissible cable temp. 90°C
Standard IEC/EN 60800
Warranty 2 years
Min. installation temp. -15°C
IP Rating IPX7
Earth protection Aluminium Mylar tape with copper conductor
Cable flexibility Minimum allowable cable radius is 30mm